Summary
Overview
Work History
Education
Skills
Timeline
Qualifications Synopsis
Trainings Certificates
Personal Information
Tel
Skype Id
References
Hi, I’m

BRAHMI Fateh

Instrument & Control System Engineer
Darguina

Summary

Seeking for a motivating and rewarding mid-level position in a company that will employ my expertise and vast experience in construction, commissioning, quality, engineering and technical management capabilities whilst promoting career development.

Instrument and control System Engineer Diligent Controls Engineer with over 12 years of experience in controls engineering. Adept at the design and testing of existing systems and new control systems. Talents in project management, programming languages, and consultancy support. Friendly and organized with familiarity with safety and health regulations.

Overview

11
years of professional experience
5
years of post-secondary education
3
Languages

Work History

JV GAS (KBR/BP - SONATRACH - STATOIL)

DCS Engineer
12.2019 - Current

Job overview

  • Provide support services to Technical Division and advice for the less experienced engineers in the divisions
  • The advisors work very close with the engineering staff to convey their advice to all operating staff
  • Preparation of the Obsolescence status of all control systems hardware and software
  • Plan and provide cost effective solutions for upgrading of DCS, ESD, F&G, BMS, PLC, HMI and other related instruments & control system
  • Provide technical engineering oversight during the commissioning, start up, operations of new rotating equipment and package at CPF, SBF and wellhead
  • Provide support services and assured the recovery plan and take backup for all controllers, HMIs, OP and switches, for all ISG CPFs, SBFs, RTUs with organization of this program backup, procedure, software with recommended cable for connection
  • Investigate plant and equipment trips and provide remedial engineering recommendations
  • Maintains and improves the ICSS control system infrastructure, database applications.
  • Enhanced plant safety by conducting thorough DCS risk assessments and addressing potential hazards.
  • Communicated effectively with stakeholders at all levels, presenting complex DCS information and insights in an accessible manner for informed decision making.
  • Supported commissioning activities through the preparation of test procedures and coordination with other disciplines
  • Reduced downtime with thorough preventive maintenance of control systems and instrumentation
  • Collaborated with multidisciplinary teams to optimize plant performance and troubleshoot issues
  • Conducted root cause analysis investigations following unexpected plant shutdowns, identifying corrective actions to prevent recurrence
  • Developed detailed project specifications, including scopes of work, schedules, and budgets for successful project delivery
  • Provided technical assistance during the development of operation/maintenance manuals for new equipment installations, ensuring clear understanding by endusers
  • Improved troubleshooting capabilities by providing comprehensive training to technicians on instrument control systems
  • Evaluated new technologies for potential application within existing facilities to improve overall performance or reduce costs associated with operation/maintenance activities
  • Enhanced system efficiency by designing and implementing control strategies for various instruments
  • Participated in design specification review meetings, coordinating with inter-departmental teams to align ongoing efforts and overall business goals
  • Contributed to client proposals, spearheading compliance with prescribed technical specifications and budgetary concerns

SAMSUNG CONSTRUCTION

Instrumentation Supervisor
02.2018 - 12.2019

Job overview

  • Lead a team of Instrument calibration and DCS controls specialists who are responsible for construction and commissioning the plant instrumentation and controls system
  • Includes supervisory requirements such as scheduling of personnel to cover required work, documentation of work practices by individuals to ensure compliance to plant procedures, monitoring of attendance, adherence to safety rules and regulations, etc
  • Responsible for all team of calibration in laboratory and site (BOP, GT, ST, ACC, CEMS, FUEL GAS, HRSG …), calibration of control valves, PSV and instruments ( Flowmeter, Pressure, Level, Temperature, Switch, Vibration, Gas detector, Flame detector….)
  • Supervising I&C Pre-commissioning (calibration) & commissioning activities
  • Check the hot loop of different instruments and valves from site to DCS
  • Start-up of skid (BOP.GT, ST, ACC, CEMS, FUEL GAS, HRSG …)
  • Configuration and control of parameters (rang, tag, description….) during turbines and auxiliary system running with GE Control System Solutions (ToolBoxST, CIMPLICITY, Bently Nevada, Ex2100 Excitation Control….) Perform various GE Gas & steam turbine main systems functional test with client
  • Provide realistic and practical technical solutions to project calibration and commissioning challenges
  • Plan, prepare and present training for I&C and DCS group and cross training for other plant personnel to increase the understanding of I&C capabilities while improving performance and enhancing safety levels.
  • Supervised, directed and participated in installation, maintenance and repair of control circuits, pressure switches, floats and underground cables.
  • Provided technical support during plant shutdowns and turnarounds, ensuring seamless execution of critical tasks within tight deadlines
  • Coordinated closely with third-party contractors during installation projects to ensure seamless integration of new instruments into existing systems
  • Ensured safety compliance by conducting risk assessments and implementing necessary control measures for hazardous operations

SAMSUNG ENGINEERING For (TOTAL-CEPSA-SONATRACH)

QC Instrumentation Engineer
08.2017 - 02.2018

Job overview

  • Offsite and onsite instrument & telecom inspections: EPCCS1, EPCCS2.Pipeline & CPF
  • Final Inspection of Instrument and telecom equipment
  • Verification of ITP procedure and prepare RFI with ITR
  • Verification of drawings and raise comments, punch list
  • Final Inspection of the instrument and telecom installations and calibration - Communicate daily report to management
  • Wetness telecom
  • Inspection of Instrumentation and fiber optic cable after pulling and splicing in export line, truck line and flow line
  • Final inspection of materials and equipment
  • Verification of equipment and instruments with specifications of Project
  • Verification of identification and cable laying
  • Verification of constructions and their conformity with drawings
  • Inspection of instrumentation and fiber optic cable laying and termination
  • Inspection of reflect metric test of fiber instrumentation and optic cables
  • Participate for weekly MOM.
  • Designed electrical products and systems based on client briefs.
  • Contributed to project success by providing accurate documentation on equipment specifications, installation procedures, and testing results
  • Conducted comprehensive functional tests on electrical instruments to ensure optimal performance upon installation completion
  • Conducted random sample inspections of in-process or finished instrumentation products
  • Performed planned audits and complaint follow-up and verified adherence to company quality control standards for electrical instrumentation

BONATTI

Instrumentation & Electrical Engineer
12.2016 - 07.2017

Job overview

  • Review the design of client (SONATRACH) of telecom system, instrument hook-up, P&ID, piping isometric drawings, instrument loop diagram, marshaling, fire alarm, JB termination vendor drawings and raise technical queries of design and counter check the response of query before releasing to construction
  • Interact with clients engineers for proposal of changes in design, based on actual site condition to come up with best solution considering the cost impact of changes
  • Provide technical solution for field construction queries by providing RLM of schematic drawing, cable routing drawing, termination drawings telecom and instrument hook-up and other related engineering drawings
  • Provide construction technical documents to clear the construction QA/QC punch list
  • Responsible for material take off, material reconciliation, material requisition to client prior to construction activities and preparation of purchase requisition of unavailable construction materials in clients' warehouse.
  • Provided technical support to colleagues on complex issues, assisting them in finding efficient solutions to problems.

MERIPLAST

Automation Engineer
08.2015 - 12.2016

Job overview

  • Programming and repairing the PLC, DCS and HMI (SIEMENS, OMERON, Schneider Electric, B&R Automation, Allen-Bradley…)
  • Insured electrical installations machines and all materials
  • Maintenance and testing equipment before commissioning and production
  • Programming and repairing of different Electrical and Automation systems
  • Troubles shoot and rectify Instrumentation and Control related faults within reasonable time frame to ensure maximum availability of equipment
  • Ensure all Instrumentation equipment is functioning within the designed parameters
  • Coordination and supervision of execution technicians work on site.
  • Promoted a culture of innovation by sharing knowledge with colleagues and encouraging continuous learning in the field of industrial automation.
  • Worked closely with vendors to ensure timely delivery of high-quality automation components while adhering to budget constraints.

IRIS-SAT (EURL SATEREX)

Maintenance Engineer
10.2013 - 08.2015

Job overview

  • Assigned as Maintenance Engineer for production unit
  • Maintenance and repairing of electrical and instrument systems
  • Insure good communication between all the team maintenance
  • Familiar with all operation and all preventive and curative maintenance procedure
  • Prepare Permit to Work for Senior Instrument Technician approval and perform operations and maintenance activities in accordance with established company Quality Systems and manufacturers' practices and procedures
  • Maintain tools and equipment in fully working order
  • Complete all necessary documents, forms, checklists and documentation as required prior to, during and subsequent to operations and maintenance activities
  • Troubles shoot and rectify Instrumentation and Control related faults within reasonable time frame to ensure maximum availability of equipment
  • Ensure all Instrumentation equipment is functioning within the designed parameters
  • Assist with overseeing the staff of any sub-contractors working associated with the Instrument and control equipment
  • Support the Senior Instrument Technician and Maintenance Supervisor in their duties
  • Provide support for any emergency response
  • Coordinated with the Procurement Department for planning and procurement of spares, consumables, tools and other materials including stores and inventory management.
  • Reviewed technical documentation to complete equipment maintenance and repair.
  • Audited existing preventive maintenance plans, updating them based on current needs to reduce unnecessary expenses or redundancies.
  • Organized and directed maintenance shutdowns and startups.

Education

University of Abd Rehmanne Mira, Béjaia
Béjaïa, Algeria

Master of Science from Instrument And Control System Engineering
09.2008 - 05.2013

University Overview

Skills

LAD, IL, ST, FBD, SFC, AB, ANSI C

Timeline

DCS Engineer
JV GAS (KBR/BP - SONATRACH - STATOIL)
12.2019 - Current
Instrumentation Supervisor
SAMSUNG CONSTRUCTION
02.2018 - 12.2019
QC Instrumentation Engineer
SAMSUNG ENGINEERING For (TOTAL-CEPSA-SONATRACH)
08.2017 - 02.2018
Instrumentation & Electrical Engineer
BONATTI
12.2016 - 07.2017
Automation Engineer
MERIPLAST
08.2015 - 12.2016
Maintenance Engineer
IRIS-SAT (EURL SATEREX)
10.2013 - 08.2015
University of Abd Rehmanne Mira, Béjaia
Master of Science from Instrument And Control System Engineering
09.2008 - 05.2013

Qualifications Synopsis

Qualifications Synopsis

Engineer Degree in the Instrument and control System Engineering. With international and national experience for 10 years, I acquired undoubtedly a perfect mastery of tools and techniques related to the fields of Instrument, control System, telecom and electricity with good knowledge of the facilities and electrical cabinets in various industries as well as in the fields of oil & Gas, Treatment and Separation, Refining and in the sector of the energy.

Trainings Certificates

Trainings Certificates
  • 02 November 2023: Training Certificate (HITRA) Hazard identification task risk assessment as per BP procedure.
  • 31 October 2023: KROHNE Academy Online Certificate for Variable area flowmeters simple reliable and safe.
  • 25 October 2023: KROHNE Academy Online Certificate for Cybersecurity in process automation environments.
  • September 2023: Two-days training for IT/OT Control System on Tenable.OT with Specialist Certificate of Attendance.
  • September 2023: KnowBe4 online Cyber Security Awareness Training session 2.
  • 06 June 2023: Certificate from U.S. Department of Homeland Security Cybersecurity and Infrastructure Security Agency (CISA) for completion of online course 100W Cybersecurity Practices for Industrial Control Systems.
  • May 2023: KnowBe4 online Cyber Security Awareness Training session 1.
  • September 2022: Training Certification session Rockwell Automation on Logix Maintenance and Troubleshooting.
  • July to August 2011: SONELGAZ, KHERRATA Unit, BEJAIA, ALGERIA
  • July - August 2011: SONELGAZ, KHERRATA Unit, BEJAIA, ALGERIA - Training session on Society of Electrical and Gas Production and Distribution (SONELGAZ)
  • March - April 2011: SONELGAZ, DARGUINA Unit, BEJAIA, ALGERIA - Training session on Society of Electrical and Gas Production and Distribution (SONELGAZ)

Personal Information

Personal Information
  • Place of Birth: Darguina, Béjaïa, Algeria
  • Date of Birth: 03/01/88

Tel

Tel
(+213) 669182621/ (+213) 542977624

Skype Id

Skype Id
brahmi06

References

References

References can be available upon request.

Similar Profiles

CREATE PROFILE
BRAHMI FatehInstrument & Control System Engineer