Ferhat CHABANE
Bejaia
Overview
30
30
years of professional experience
Work History
Senior Installation Supervisor & Commissioning Engineer
Aspecto GmbH Client GE Vernova
06.2023 - 08.2024
- Installation Supervision of AIS & GIS systems
- Commissioning of protection, AIS & GIS systems
- Testing of the protection systems according to industry standards and customer requirements
- Consulting the client’s staff
- Technical support to customers reasonable activity in this area of business
Electrical Construction Supervisor-3GP/3GI
TCO Tengizchevroil FGP Project
11.2019 - 03.2022
- Supervisor responsibilities include and are not limited to the following:
- Communicate the construction requirements to all contractors and staff ensuring compliance and conformance with the safety plan, quality plan and client requirements
- Management and guidance of supervision to ensure site productivity and efficiency result in meeting contract targets
- Supervise and coordinate the construction activities within assigned areas
- Provide daily supervisory surveillance checks and records, ensuring that contractors management and supervision are providing safe working conditions and permit procedures, protective equipment, experienced/qualified supervision and manpower, with reliable, well maintained equipment to execute the contracted works as per contract schedule and targets
- Routinely study, check, review and validate the discipline scope of work against the appropriate Contract requisition to ensure the contractors correctly interpret and comply with the latest revision AFC drawings, quantities, and specifications
- Where applicable supervise test equipment calibration
- Identify the hand over sequence on a system by system, area by area basis, all scheduled to produce logically planned work completions for commissioning and start-up requirements
- Perform other tasks upon request from the discipline superintendents
Electrical Commissioning Supervisor
Technip FMC (South Tambey LNG) Yamal Project
06.2018 - 12.2018
- Working as Electrical Commissioning Supervisor – Commissioning, Responsible for Electrical Activities for YAMAL LNG Project Train3
- Responsibilities:
- Energize SWGR / BUS-BAR and make all papers before energization including NOI notice of energization, pre-checks
- Attend for all Site trainings including SIMOPS, Working at Height, Confined space, etc
- Daily Commissioning meeting and weekly Safety Meeting
- Lead of more than seven Electrical Technicians from EPC Team
- Commissioning activities for Mega LNG Train3 which include:
- To validate Relay Settings & Switchgears (Siemens make at110kV,35kV,10kV &400V)
- Typical Relay Model at site:7SJ6x,7SD6x,7SK8x (SIPROTEC4 &5)
- To validate PDCS System (Power Distribution and Control System) (Siemens)
- Coordinate with Vendors for commissioning
- Mandatory Trainings:
- General Site Requirements, Industrial and O&G Safety according to RF Rules/standards, RF Labour Code Constructions and PCC requirement induction, PTW Process Trainings, Risk Assessment Safety Requirements (SIMOPS, JSA, WAH, CSE, LOTO, SIMOPS, FTM, First Aid)
- About the Project:
- The Yamal LNG project is an integrated production complex for natural gas and gas condensate with further liquefaction, storage and arctic with an annual capacity of16.5 million tons of LNG and1 million tons of gas condensate
- Very close to the North Pole, toughest work conditions with temperatures dropping to as low as -55 Deg C
Electrical Supervisor/Instructor
ISS International for client ENI Nigeria
11.2016 - 12.2017
- Details of the tasks performed:
- Train and support the development of the company according to their development programs so that they acquire the knowledge and skills specific to the site necessary to perform according to the standards of the company
- For operators / technicians and main technicians / main operators
- Prepare relevant training schedules based on the actual needs of the trainees concerned
- Develop teaching materials related to their respective discipline
- Identify and organize the resources / learning materials required by trainees
- Conduct classroom training using a variety of audio-visual tools, e-learning, to ensure candidates acquire the specific knowledge required for the site
- The
- 10
- Conduct professional / coaching sessions in the factory and in the workshop in coordination with supervisors / engineers to ensure candidates acquire the skills necessary to perform various tasks safely, effectively and efficiently company standards
- Coordinate and organize with the formation of the HSE Security Department new recruits
- Other abilities
- - Knowledge of IEC standards
- - HSE prices related to oil and gas
- - develop theoretical courses and an evaluation sheet
- - carry out electrical authorization courses
- - Electrical hazards and their effects (special course for non-electrician)
Electrical Supervisor
WGPSN AT IEMC SHELL GABON
12.2015 - 09.2016
- Daily reporting to the Contract Site Representative, maintenance superintendent follows Company HSE policy, rules and procedures
- Work permits preparation for day to day jobs using company work management system (WMS) and applying safety control measure
- Supervises contractor on pre-commissioning activities to ensure RFC done with associated punch-list
- Approval of Electrical OPERCOM functional test sheets and advices on commissioning activities related to electrical matters
- Corrective & preventive maintenance of all types of electrical devices such as the generation power production, electrical and network distribution, HV/LV motors, different package of gas turbine, gas compressor, emergency diesel generator, HV/LV transformers, UPS
- Relevant all the electrical protection System such generators, motors, transformer and distribution
- Supervise and coordinate repairs, equipment replacements
- Coordinate with technical support, the spare parts, the preparations of heavy maintenance operations
- Identifies recurrent corrective maintenance intervention, analyses and suggest improvements
- Analyze requests for interventions in the field, supplemented if necessary, by a diagnosis on site and turn them into the CMMS Work Order
- Prepare interventions CMMS:
- Ensure the availability of spare parts, the book or make the necessary purchase requests
- Check reception site (qualitative and quantitative)
- Supervise maintenance operations carried out by teams and ensure timeliness of performance and team performance
- Supervise maintenance operations performed by external actors (CSM, regulatory inspections, subcontractors of the CONTRACTOR or COMPANY, etc.
- ) , In agreement with the Superintendent Maintenance ( SIM ) and the business manager of the Maintenance Department of the COMPANY
- Check and analyze the parameters of condition monitoring and initiate actions to reduce corrective maintenance operations
- Maintain the backlog in its field and offer COMPANY corrective measures in case of drift
- Identify interventions recurring corrective maintenance, study and recommend any modification, addition or deletion to a better functioning facilities or improved equipment reliability
- Transmits the CSR updates technical documentation for equipment and spare parts (drawings, diagrams, paper and electronic procedures, database CMMS) site
Electrical Planning Engineer
Wood Group Luanda(BP) FPSO Block18
11.2014 - 11.2015
- Responsible for the generation of high-quality job plans and work packs to allow efficient scheduling, assignment and execution of work
- Responsible for identifying permits needed
- Responsible for following Global Work Management processes and standards within planning activities and monitoring the agreed upon KPIs, taking appropriate actions to close the deviation from target
- Responsible for identifying improvement opportunities and basic defect elimination in the day to day execution of work
- Responsible for ensuring personal competency development tasks are completed
- Responsible for maintaining healthy relationships and effective collaboration with other Planners and other teams to improve performance
- Responsible for daily backlog management, within their area of responsibility, to clean up and prioritize work
- Responsible for modifying job plans based on feedback received
- Responsible for requesting modification or creation of master data such as new materials, new locations, description changes, etc
- Responsible for conducting job / field walk-downs for the work
- Responsible for maintaining job plan libraries and ensuring Job Plans are complete, accurate and easily accessible to all
- Responsible for setting realistic Target Dates for execution of the work
- Responsible for setting realistic required by Dates for procurement of material and services
- Responsible for identifying the people, tools, materials, services, and procedures needed for a quality work pack
- Responsible for expenditure of the R&M budget within delegation of financial authority
- Responsible for assisting in deploying Global Work Management programs
Site Maintenance Coordinator ORM
SPIE Oil and gas
03.2013 - 06.2014
- Responsibilities: In-charge of All Maintenance Activities Equipment Installed
- Manage around35 technicians (electrical & HVAC staff)
- Transformers132/33kv;33/11kv &11/415v total more than30 substations (ABB and Siemens)
- HVAC System Package-DX units and Chilled Water Type System
- F&G System with FM200 & CO2 Protection Syst/ HSSDs; Gas Detectors; Heat Detectors; Smoke Detectors
- Chlorination Mini-Plants
- Pumps and Pipelines
- UPS : Chlorides and GUTOR Systems
- Overhead Cranes (i.e.:66/15/14/10/8/5 & lower)
- Network: Fire Water/ Industrial & Potable / Foul Sewage
Electrical Maintenance Engineer (Chargé d’affaires en Electricite) onshore /offshore
Cegelec Total Gabon
12.2012 - 02.2013
- Develop the Maintenance Procedures System & reviewed the HAZOP, JSA (Job Safety Analysis)
- Utilization of a Computerized Maintenance Management System (CMMS) MAXIMO to create work orders, work planning/prioritization and maintains necessary records and reports of repair work and environmental records
- Key Installs, troubleshoots, repairs and maintains a wide array of electrical equipment (LV and HV from5,5KV-11KV upto60KV) associated with oil and gas producing operations including but not limited to:
- HV and LV Variable Frequency Drives with water- or air-cooling system (ASIRobicon Perfect Harmony drives series)
- Chloride UPS and industrial Rectifiers - Chillers (Aermec) HV and High-Power Transformers Heaters
- HV(5,5KV) and LV electrical motors ABB and Schneider60KV SF6 Circuit Breaker outdoor ABB
- Power Generation equipment (Gas Turbo Generator Nuovo Pignone Frame5 MS5001 +22 MW Brush Alternator) and auxiliary’s systems
- Diesel generators SDMO and Caterpillar
- Switchgears (ABB Unigear5,5KV and11KV, Schneider SM630KV)
- Configuration, troubleshooting and testing different numerical relays ABB and Schneider (Ref542plus, REM545, REL316, SPAU, SPAD and SEPAM)
- Established priorities, making improvements on work methods and participated in evaluating modification proposals, failure analysis and unscheduled shutdowns
- Follows-up the spare parts and consumables consumption, report anomalies and initiate suitable action in order to prevent shortage
- Reviews the requests for materials, defines the technical specifications for purchase
- Assist and coordinate with different maintenance contractors’ on-site and outside company
- Preparation of schedule and task information to upload to CMMS
- Accurately update the CMMS system with regards to equipment maintenance history and job records database
Electrical Supervisor
Perenco Gabon (MOPU OFFSHORE PLATFORM)
11.2011 - 11.2012
- Supervision of all Electrical and Instrument maintenance tasks, including troubleshooting and repair of instrumentation such as temperature, pressure, flow meters and power distribution equipment
- Responsible for assessing, approving and prioritizing work requests
- Assessing and authorizing maintenance related processes and equipment changes
- Installing and managing motor controls, switch gear, transformers, instrumentation and safety instrumented systems
- Extending major electrical/instrumentation support, including managing project/drawing reviews, defining work scope and reviewing equipment data
- Investigating incidents and ensuring strict adherence to all electrical/instrumentation related standard practices
- Providing technical support identifying maintenance on electrical/instrumentation issues
- Responsible for preparing instrumentation diagrams, wiring diagrams, integrating hardware and software and controlling schematics
- Designing measurement and control systems by applying instrumentation, electrical and electronics technology to suit client requirements
- Conducting site visits to verify instrument design, specification and documentations prior to project start ups
- Identifying deficiencies and assisting in troubleshooting rotating equipment design, operation and maintenance issues; mentoring the investigation teams to efficiently resolve recurring rotating equipment failures
Electrical Engineer
Dietsmann Maintaining Energy IPP OKPAI Nigeria
07.2011 - 09.2011
- Electrical Engineer on the power Plant450MW cycle combined
- Manages around10 technicians (electrical & HVAC staff) and different contracts for services in the power plant450MW (two GT’s and steam turbine)
- Organizes on site the maintenance operations with are responsible
- Good experience on CMMS (Maxim5.2, datastream D7i)
- Good knowledges of electrical international standards relative to oil & gas industry
- Experience in commissioning and start-up and maintenance management
- Ability to work in a multicultural team
Electrical PTW
Alstom Terga Algeria
03.2011 - 07.2011
- Competent Electrical persons will have responsibility for all the following tagging and electrical lockout activities and on this purpose will indicate all the actions in the electrical work certificate together with the signatures of the requesting engineers
- Maintaining an accurate log of padlocks and tags fitted and removed on the electrical work certificate and relevant PTW
- Checking electrical system status before fitting tags and padlocks
- Electrical isolation of equipment at local points(where available) and fitting of tags and padlocks at local electrical isolation points
- Maintaining an accurate log of padlocks and tags fitted and removed on the electrical work certificate and relevant PTW
Electrical Supervisor (P/I Electrical Superintendent)
ENI-Saipem spa
10.2010 - 03.2011
- Supervision of the construction and Pre-commissioning, commissioning and start up of the Electrical installations for the Menzel Ledjmet East (MLE) gas field is a commercial project being jointly developed by Sonatrach (SH) and First Calgary Petroleum’s Ltd
- (FCP)
- The MLE field lies within the Ledjmet Block405b in the Berkine Basin of Algeria approximately220 km south-east of Hassi Messaoud
- The development concept consists of a field gathering system, Central Processing Facility (CPF), infrastructure, and export pipelines for gas, LPG, condensate and oil
- The plateau reservoir production will be230 MMscfd and the base concept is a standalone development for the MLE field with space requirements to accommodate facilities for processing of Central Area reservoir fluids at a future date
- I cover the position of Head of Electrical Department (Electrical Superintendent) to do the construction of all Electrical Installation
- The Plant is to produce Oil and Gas that came from Wells
- All Electrical Installations are the following:
- Two60kV Overhead Lines,60kV GIS Substation, main Switchgear room MV/LV, Transformers, Satellite and Flare Substations, all MV and LV Motors, lighting, grounding, Main control Room, Emergency Diesel Generator etc
ELECTRICAL SUPERVISOR
SAIPEM .SA Hassi Messaoud, Algeria
04.2010 - 09.2010
- Supervision of the construction and Pre-commissioning, commissioning and start up of the Electrical installations for the GOSP (Gas Oil Separation Plant) UTBS Project
- The construction is for: MV (30kV)-LV Switchboards, Transformers, emergency Generators, UPS, Lighting, and Motors
- Construction, Pre-commissioning, commissioning, loop check from field devices to substation, functional test, cause & effects, DCS, ESD and Fire and gas, ECS (Electrical Control System) start up
ELECTRICAL ENGINEER
JV Sonatrach – Amerada Hess, Algeria
02.2003 - 03.2010
- Maintenance supervisor responsible for a team of10 electrical technicians in perfectly carrying out their daily inspection & preventive maintenance for all electrical equipment [high / low voltage electrical motors, high / low voltage circuit breakers, high voltage transformers battery chargers, UPS (Gutor chloride) variable frequency driver.etc.], supervised work on substations and other electrical enclosures
- Reset electrical protection devices on equipment rated at up to11kV
- Isolations / restorations of HV equipment allowing for mechanical work to be carried out coordinated and participated in the preventive, corrective and troubleshooting electrical activities of the plant equipments
- During the EPC period , provided technical support for:
- Walk-down, Commissioning & start-up activities (0.4kV,5.5 kV and11 kV Systems,60 kV Distribution Systems, UPS, Rectifier and Batteries, Variable Speed Converters, Power Management System–PMS, motor starters, motors etc Gas Compression and Reinsertion Project consisting in: Oil Separators, Oil Storage Tanks and Pumps, Booster Compression, Gas and Water Injection System, Gas Lift System, Produced Water Treatment Plant, Fire Fighting System,88 MW GE-Power Generation Plant,60 kV Power Distribution System (El-Gassi Oil Field- Algeria)
- The systems are ABB, Merlin-Gerin, General Electric (Nuovo Pignone), Termodyn, Chloride, Asi-Robicon etc
- Provided guidance for electrician technicians in case of curative maintenance (using dedicated documentation & internet support)
- Prepared intervention procedures on equipments & issued work permits
- Developed & implemented a comprehensive Maintenance Program, daily maintenance activities
- Developed the Maintenance Procedures System & reviewed the HAZOP, JSA (Job Safety Analysis), MOC (Management of Change), provided the O&M feedback for CMMS (MAXIMO Software)
- Reviewed the maintenance job plans & routines per vendors’ manuals & recommendations
- Prepared work packs for shutdowns
- Prepared spare parts for electrical equipments by creating new stock items & spare parts lists for Purchasing/warehouse activities & follow-up
- Computer-assisted for maintenance management using MAXIMO5.2 system
- Supervised all electrical isolations, earthing operations and power restorations on power distribution equipment rated up to11kV allowing electrical works or tests to be carried out
- Participated in the planning, scheduling and execution of shutdown and major overhaul electrical activities
- Established priorities, making improvements on work methods and participated in evaluating modification proposals, failure analysis and unscheduled shutdowns
- Conducted Toolbox meetings with subordinates for discussing safety and methods of completing job tasks
- Attended HSE Department safety meetings on Risk assessment & ensured Company’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under technician’s responsibility
- Keeping a critical eye on current preventive maintenance programmes and, if need be, suggest improvements
- Warning support teams of any recurring problems related to the availability or quality of spare parts
- Suggested improvements and requests modifications
ELECTRICAL ENGINEER
ZIDANE Bros Ltd, Setif, Algeria
01.1998 - 01.2003
- Specialized in marble processing and tiles manufacture
- Supervised assembling machines, electrical cabling and electrical maintenance
ELECTRICAL ENGINEER
Food factory in Kourganinsk, Russia
08.1996 - 11.1997
ENGLISH TEACHER
Basic school number01 Kourganinsk, Russia
09.1994 - 06.1996
Education
ELECTRICAL ENGINEER DEGREE (bachelor’s Degree) - undefined
Tashkent State University of Technology
01.1993
Skills
- WORD : FAMILIAR
- POWERPOINT : FAMILIAR
- EXCEL : FAMILIAR
- ACCESS : FAMILIAR
- OUTLOOK : FAMILIAR
- CMMS: MAXIMO52 as key mastery of GMAO System/SAP
LANGUAGE MASTERY
Berber : North African Mother Tongue
French : Read, spoken written: Fluently
Arabic: Read, spoken written: Fluently
Russia: Read, spoken written: Fluently
English: Read written and spoken proficiently
Training
- Permit to work, Energy Isolation, working at height, Confined space, Ground disturbance Excavation, Risk assessment’, Lifting operations, Management of Change, Communication, Manuel Handing, Chemical Awareness, Environmental Awareness, Basic Fire Prevention, Basic First Aid, Integrity Management, Hazard Recognition, Job Safety Analysis (JSA). Control of Hazardous Substances to Health (COSHH), Incident Investigation &Root Cause Analysis Course.
- Electrical Safety & Authorisation
- Safe Isolation & Reinstatement of Plant (SIRP) training ISO-001(Petrofac)
- Lock Out Tag Out (LOTO) training ISO-002 (Petrofac)
- Electrical Authorisation (EA) Procedure training ISO-004 (Petrofac
- Electrical Isolation training ISO-004 (Petrofac
- HSE Accelerated Program (IHRDC Houston)
- Fundamentals DCS training (Naftogaz).
- Bently Nevada3500 training with GE Nuovo Pignone.
- VSD Converter Perfect Harmony with AsiRobicon.
- Diesel Generator set Operation & Maintenance with SDMO.
- Gas compression process training.
- Power electronic training IAP Algeria (Algerian Petroleum Institute)
- UPS Design and function, Principles of UPS control units, Power Modules. Alarms and operating indicators, Options (customer-specific, Maintenance and basic trouble shooting, Battery introduction, Basic programming of UPS Level1,2,3- Electronic boards detail, Enhanced calibration, -programming the UPS, Enhanced trouble shooting.
- Protection and Substation Automation in ABB University Switzerland, comprising the following subjects: Theory Protection and Substation Automation, Feeder Protection and Control IED.RE.54. Feeder Protection and Control IED REF542plus. Numerical Protection and Control IED.316
- 4. Differentiel Protection Relay SPAD346C, and Voltage Regulator SPAU341C.
- Course in Reliability Centred maintenance (RCM2).
- Electrical Control system ECS Schneider training
- MAXIMO5.2 Computer-based maintenance
- Basic offshore safety Induction &Emergency Training BOSIET
- Helicopter Underwater Escape Training HUET.valid05 years
- Electrical C18510 B2V BR BC(BTA) H1 HC (HTA) valid03 years, until2021(APAVE).
Timeline
Senior Installation Supervisor & Commissioning Engineer
Aspecto GmbH Client GE Vernova
06.2023 - 08.2024
Electrical Construction Supervisor-3GP/3GI
TCO Tengizchevroil FGP Project
11.2019 - 03.2022
Electrical Commissioning Supervisor
Technip FMC (South Tambey LNG) Yamal Project
06.2018 - 12.2018
Electrical Supervisor/Instructor
ISS International for client ENI Nigeria
11.2016 - 12.2017
Electrical Supervisor
WGPSN AT IEMC SHELL GABON
12.2015 - 09.2016
Electrical Planning Engineer
Wood Group Luanda(BP) FPSO Block18
11.2014 - 11.2015
Site Maintenance Coordinator ORM
SPIE Oil and gas
03.2013 - 06.2014
Electrical Maintenance Engineer (Chargé d’affaires en Electricite) onshore /offshore
Cegelec Total Gabon
12.2012 - 02.2013
Electrical Supervisor
Perenco Gabon (MOPU OFFSHORE PLATFORM)
11.2011 - 11.2012
Electrical Engineer
Dietsmann Maintaining Energy IPP OKPAI Nigeria
07.2011 - 09.2011
Electrical PTW
Alstom Terga Algeria
03.2011 - 07.2011
Electrical Supervisor (P/I Electrical Superintendent)
ENI-Saipem spa
10.2010 - 03.2011
ELECTRICAL SUPERVISOR
SAIPEM .SA Hassi Messaoud, Algeria
04.2010 - 09.2010
ELECTRICAL ENGINEER
JV Sonatrach – Amerada Hess, Algeria
02.2003 - 03.2010
ELECTRICAL ENGINEER
ZIDANE Bros Ltd, Setif, Algeria
01.1998 - 01.2003
ELECTRICAL ENGINEER
Food factory in Kourganinsk, Russia
08.1996 - 11.1997
ENGLISH TEACHER
Basic school number01 Kourganinsk, Russia
09.1994 - 06.1996
ELECTRICAL ENGINEER DEGREE (bachelor’s Degree) - undefined
Tashkent State University of Technology
Similar Profiles
Baldeep Pal Singh BaliBaldeep Pal Singh Bali
Senior Sales & Segment Leader (M&D) at GE Vernova T&D India Ltd. (GE Vernova)Senior Sales & Segment Leader (M&D) at GE Vernova T&D India Ltd. (GE Vernova)
ERASTUS NDUNGUERASTUS NDUNGU
Senior Sales /Project Dev Manager - SADC/EA at GE Vernova (GE Gas Power)Senior Sales /Project Dev Manager - SADC/EA at GE Vernova (GE Gas Power)
HAMMAD MUHAMMAD ARIFHAMMAD MUHAMMAD ARIF
Finance Intern at GE Vernova Canada, GE Renewable Energy-HydroFinance Intern at GE Vernova Canada, GE Renewable Energy-Hydro
Khaled KhouasKhaled Khouas
Mecanic, Driver and Operator of Cement Mixer Truck at Sarl Benmaamar_Sahel BetonMecanic, Driver and Operator of Cement Mixer Truck at Sarl Benmaamar_Sahel Beton
Ali BeloudnineAli Beloudnine
Senior Electrical Technician at Qatar Energy LNGSenior Electrical Technician at Qatar Energy LNG